Sunday, June 25, 2017

SIMPLE 1 INCH SCALE UPHOLSTERED CHAIR FROM POSTER BOARD - How to make a simple 1 inch scale dollhouse upholstered chair from poster board.

Do you have kids or grandkids roaming around the house this summer?  Would they be interested in making a chair with you?
This is my first chair that I made over 20 years ago.  My daughter needed a living room set and I looked through Hobby Builders and they had this simple looking set in the catalog.  It was the least expensive set but still couldn't get it.  I came up with a pattern and she was very happy to finish her living room!

Here are Nancy's lovely patterns to follow.
I will have a kit available, also.

Use the instructions in the "Things to do, Things to see" list at the left of the blog, HOW TO RE-SIZE THE PATTERNS to print your patterns out.

Use glue stick to glue the fabric to the poster board.

Using tacky glue to glue everything else.

Be sure to have baby wipes or a wet cloth to wipe your fingers clean of glue.  Wipe your fingers frequently.

Print Nancy's patterns out onto card stock.  Trace around the patterns onto poster board.  I get my poster board from Michaels.  I use the heavy weight poster board.

Use the back of your craft knife to score on the lines.

The kit will have this cut out and scored for you.

This is the chair body.

Very important, please use 100% cotton fabric.  Go to the quilting section of your fabric store or go to a quilt fabric store.  100% cotton fabric always glues.

Apply glue stick to the surface of the poster board.


Place your fabric wrong side up on the table and press the chair body onto the fabric.

Smooth over the top of the chair body.

Make sure you have extra fabric all around.

You may draw around the chair body 1/4" away from the edge of the edge.  This will be your cutting line.

I've trimmed off the extra fabric.

Look on the left, that fabric has been trimmed to the edge of the poster board.

In the center I have cut into the corners.

So the fabric can be glued down smoothly I've cut "V" shapes around the curved parts of the body.

I've also cut "V" shapes at the scored lines.

This picture shows the other side of the chair body.

Apply glue stick to the edges of the poster board body and press the extra fabric into the glue.

In this picture I've all ready glue up the bottom.

Don't glue the center down.

I've glued everything but the center.

Turn the chair body around and this is what it should look like.

Apply tacky glue to the long side of the back.

Smear the glue with your fingers.

Wipe your fingers.

Bend the flap on the other end of the body.

Bring the two ends together and press the flap into the glue.  The flap will be inside the body.

Press the body of the chair together
making sure the edges are even.

This is how the chair should look so far.

Trace around the patterns to cut a chair base from four layers of foam core and two layers of mat board.

Glue them together with tacky glue.

The kit will have this all ready glued cut and glued together.

Apply tacky glue to the inside of the chair along the bottom.

Smear the glue and wipe your fingers.

Slip the chair onto the base.

Apply tacky glue to the top of the base.

Press the fabric onto the top of the base.

Press the sides of the chair to the sides of the base.

Stretch a large rubber band around the base of the chair.

Let the glue dry awhile.

In my part of the country the produce departments use large rubber bands to bind broccoli together.  I save those rubber bands.

 This is the inside of the chair.

Trace the pattern onto poster board and cut out.  Score on the lines.

Don't glue, we are just doing a dry fit.

I use Thermolam Plus, SEW IN, not the iron on.  I buy this from Walmart or Joann's.

Use the patterns cut the batting.

The batting is included in the kit.

Apply tacky glue to the middle part of the inside.  Smear the glue.

Wipe off your fingers.

Press the small piece of batting into the middle of the back.

There should be space left all around.

Add a little more glue around the first layer of batting and press on the larger piece of batting.  This piece should be even at the top and have a little space left on the sides and at the bottom.

The sides are next.  Apply tacky glue to the sides of the inside of the chair.  Press the small pieces of the batting into the glue.  The batting should be in the middle with space all around.

Apply a little more glue around the edges and press the larger piece of batting on top.  The outside curved edge should be even.  Clean your fingers.

Just dry fitting, again to see how everything looks.

Apply tacky glue to the bottom of the wrong side of the inside of the chair.

Press the wrong side of the fabric into the glue.

Turn the indies of the chair over and apply tacky glue along the bottom.

Apply tacky glue in the spaces between the batting.

Fold the fabric up onto the inside of the chair and with your fingers press the fabric into the glue.

This is the back of the inside of the chair.

Trim off the extra fabric leaving enough to fold and glue to the wrong side of the poster board.  Cut "V" shapes out along the curved edge.

Apply tacky glue to the edge a little at a time.  Smear the glue, wipe your fingers and then fold the fabric over and press into the glue.

I like to start with the middle of the arm, then press the fabric at the end of the arm.  After that I will work along the top.

One side is done.

All of the extra fabric has been glued to the back of the poster board.

This is how the inside of the chair should look.

Apply tacky glue to the inside of the chair body.

Smear the glue out to the edges, wipe off your fingers.

 Press the inside of the chair into the body.  Press all around the edges to  make sure you have a good seal.  You can remove the rubber band.

This is the seat cushion and the first and second layer of batting.

The front of the seat cushion is wider than the back.

Apply tacky glue to the seat cushion and press the batting into the glue.  There should be space left around.

Apply tacky glue to the space you left and press the next piece of batting into the glue.

The next piece of batting is the largest; it will cover the bottom and top of the cushion.

Apply tacky glue to the bottom of the cushion and press the batting into the glue leaving extra at the front of the cushion to fold over to the top of the cushion.

Fold the extra batting over to the top of the cushion.

Cut your fabric to fit the seat cushion.  Long enough for extra to be folded to the bottom.

Apply tacky glue to the bottom at the front of the seat cushion.

Don't smear this.

Press one end of the wrong side of the fabric into the glue.

Apply tacky glue to the other end of the seat cushion.

Fold the fabric over to the bottom of the cushion and press into the glue.

Apply tacky glue to the ends of the seat cushion and fold the fabric over and press into the glue.

Apply tacky glue to the ends and across the foam core.

Fold the top fabric down and press into the glue.

Trim off the bottom fabric.

If the fabric comes apart don't worry.  Apply a little tacky glue and pinch the fabric together.

Slide your seat cushion into the chair and you are done!

I have tutorials showing how to measure and make skirts for a chair in the "Things to do, Things to see" list, Make and upholster a 1 inch scale chair, in the same list there is a tutorial showing how to make a ruffle, Pin cushion box or large pouf.

Until next time,

Have fun, Expand on it, Make it better . . . .
Just keep making minis!



  1. Thank you for such wonderfully detailed and illustrated instructions ..... I know how hard that is to do. It is very difficult not to assume people know things that you find obvious. Brilliant stuff. M

  2. thank you for the chair tutorial, I have to give this one a try.


  3. Happy to read your blog and it provide us knowledge how to make miniature dollhouse furniture, mini paper accessories and get techniques, tips and monthly tutorials. Thanks for sharing with us such a wonderful blog..


  4. really great idea! :-) good job! It looks amazing :-)

  5. I so in the childhood of planes glued! It was interesting!

  6. Wow! What a great Information are there in

  7. We are honored to carry out all your transportation work We are in haraj riyadh furniture We do all the works of transporting furniture, transporting furniture, transporting equipment & all movables that need to be transported in full, while ensuring that there are no scratches, cracking, or any traces of mold. And the installation and packaging of furniture with the best packaging safe on the pallets and furnishings, which is a very difficult process and the stage of transport that is the most difficult cars must have special specifications so they are covered so we keep furniture and clothes from any dust or external factors such as hurricanes, rain and other external factors.
    We also in the haraj madinah furniture we do everything necessary for the process of transport is complete and very fast because our drivers are aware of all places and we have the most powerful staff trained on the jaw operations in a manner of security and furniture and furniture with special packaging currencies Glass is packaged in a way It is not the same way that the furniture and furniture are wrapped in it and all this at the lowest costs that have no competitor .
    we are the haraj jeddah furniture we carry out transfers on the highest quality without the high costs with the latest equipment of trucks and cars and equipment dismantle and installation and with the best workers trained all this and Aktar will know when you communicate With Furniture We are a transport .
    Transport your furniture with the utmost comfort and safety without the hassle of transportation, installation, packaging and packaging are all very important stages and need time and effort and the ordinary person can not complete this process alone, it needs those who help him will not find better than haraj dammam furniture which is the title of excellence and honor in performance and respect The nature of our work and respect for the service we offer you from a safe transfer process allows you to sense the comfort and excellence and without any costs are high Finally we have the best crew trained and the largest staff of carpenters, electricians, technicians and engineers adaptations and workers of jaw and installation of the rest of the movables of Afash and furniture Wadwa All of this kitchen is our utmost intensive care .
    Source :


  8. شركة الأوائل توب في النقل و التخزين بالرياض 0506003079
    تعتبر شركة الأوائل توب في النقل والتخزين من أفضل الشركات في مجال النقل والتخزين ومن أهم مميزات شركتنا في هذا المجال ما يلي فهي تمتلك أسطول من السيارات مجهزة على أعلى مستوى من التجهيزات الحديثة و كذلك مجموعه من العمالة المدربة علي أعلى مستوى من الفنيات والمدربة علي التعامل بحرفية مع جميع أجهزة النقل والأوناش والناقلات الكبيرة

    شركة نقل اثاث بالرياض
    شركة نقل عفش بالرياض
    شركة تخزين عفش بالرياض
    شركة شراء اثاث مستعمل بالرياض
    شركة مقاولات عامة بالرياض
    شركة صيانة مكيفات بالرياض

  9. شركة الأوائل توب للتنظيف بالرياض
    تعد شركة الأوائل توب لخدمات التنظيف من الشركات التي تحمل تاريخ كبير جدا في ذلك المجال مما يجعلها تتصدر قائمة شركات الخدمات المختلفة من حيث الجودة والمهارة والخبرة كما تعتمد الشركة علي تقديم أفضل مستوي من الخدمة بأفضل الأسعار الموجودة في المنطقة بكاملها حرصا على مصلحة العميل في المقام الأول وحرصا منها علي تاريخها الكبير في مجال الخدمات كما توفر الشركة مجموعة من أقوي الأجهزة الحديثة المتطورة التي تستخدم في عملية التنظيف كما أن كافة الأجهزة الحديثة والمنظفات المختلفة المستخدمة تتماشي مع كافة المقاييس العالمية

    شركة تنظيف بالبخار بالرياض
    شركة تنظيف بالرياض
    شركة تنظيف منازل بالرياض
    شركة تنظيف موكيت بالرياض
    شركة تنظيف شقق بالرياض
    شركة تنظيف فلل بالرياض
    شركة جلي بلاط بالرياض
    شركة تنظيف مجالس بالرياض
    شركة تنظيف مساجد بالرياض
    شركة تنظيف مدارس بالرياض

  10. شركة الأوائل توب للتنظيف وتسليك المجاري بالرياض 0506003079
    تهتم الشركة بخدمات التنظيف بشكل عام وتوفر كافة أدوات التنظيف الحديثة وكافة المنظفات التي تستخدم في تلك العملية وتهتم بشكل خاص بكافة أجهزة تسليك المجاري والمنظفات التي تقوم بتسليك كافة العوالق التي تتسبب في سد المجاري بشكل كامل كما توفر السيارات التي تستخدم في نقل كافة المعدات إلي موقع العمل

    شركة تسليك مجاري بالرياض
    شركة تنظيف بيارات بالرياض
    شركة كشف تسربات المياه بالرياض
    شركة تنظيف خزانات بالرياض
    شركة عزل فوم بالرياض
    شركة عزل اسطح بالرياض

  11. شركة الأوائل توب لمكافحة الحشرات بالرياض 0506003079
    توفر الشركة الكثير من المواد الحشرية والمبيدات المختلفة التي تقوم بالقضاء بشكل كامل علي كافة أنواع الحشرات الموجودة بالمكان كما توفر أكثر المبيدات أمانا علي صحة الإنسان أثناء الاستخدام كما أن كافة المبيدات المستخدمة لا تحتاج إلي إخلاء المكان حتي يتم الرش يمكنك رش المكان بكل سهولة ودون مغادرة منزلك، كما تتميز أسعار الشركة بالتميز مقابل مستوي الخدمة المقدمة من خلالها

    شركة رش مبيدات بالرياض
    شركة مكافحة فئران بالرياض
    شركة مكافحة البق بالرياض
    شركة مكافحة حشرات بالرياض
    شركة مكافحة النمل الابيض بالرياض
    شركة مكافحة الصراصير بالرياض
    شركة تنظيف وتلميع سيراميك بالرياض
    شركة عزل خزانات بالرياض